H3C Technologies H3C SecPath F1000-E - Manual (Page 577)

552
To configure interface PBR:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Configure interface PBR. ip policy-based-route policy-name Not configured by default.
NOTE:
If the specified policy does not exist, the interface PBR configuration succeeds, but it takes effect only when
the policy is created.
Displaying and maintaining PBR configuration
Task Command Remarks
Display the PBR routing
information. display ip policy-based-route [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display the specified PBR routing
information.
display ip policy-based-route setup
{ interface interface-type interface-number |
local | policy-name } [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display PBR statistics.
display ip policy-based-route statistics
{ interface interface-type interface-number |
local } [ | { begin | exclude | include }
regular-expression ]
Available in any view
Display the PBR policy information.
display policy-based-route [ policy-name ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view
Clear PBR statistics.
reset policy-based-route statistics
[ policy-name ]
Available in user view