H3C Technologies H3C SecPath F1000-E User Manual
Page 218
193
a.
Select Network > DHCP > DHCP Relay from the navigation tree and perform the following
configuration, as shown in
.
Figure 113 Enabling the DHCP service
b.
Select the Enable option in the DHCP Service field.
c.
Click Apply.
# Configure a DHCP server group.
a.
In the Server Group field, click Add and perform the following configuration, as shown
Figure 114 Creating a DHCP server group
b.
Enter 1 for Server Group ID.
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS H3C SecBlade LB Cards H3C SecPath L1000-A Load Balancer