H3C Technologies H3C SecPath F1000-E - Manual (Page 667)

642
# On Router C, configure GigabitEthernet 0/1 and GigabitEthernet 0/5 as the boundary of
admin-scoped zone 2.
system-view
[RouterC] interface GigabitEthernet 0/1
[RouterC-GigabitEthernet0/1] multicast boundary 239.0.0.0 8
[RouterC-GigabitEthernet0/1] quit
[RouterC] interface GigabitEthernet 0/5
[RouterC-GigabitEthernet0/5] multicast boundary 239.0.0.0 8
[RouterC-GigabitEthernet0/5] quit
# On SecPath B, configure GigabitEthernet0/1 as the boundary of admin-scoped zone 2.
system-view
[SecPathB] interface GigabitEthernet 0/1
[SecPathB-GigabitEthernet0/1] multicast boundary 239.0.0.0 8
[SecPathB-GigabitEthernet0/1] quit
4. Configure C-BSRs and C-RPs:
# On SecPath A, configure the service scope of RP advertisements and configure GigabitEthernet
0/4 as a C-BSR and C-RP of admin-scoped zone 1.
[SecPathA] acl number 2001
[SecPathA-acl-basic-2001] rule permit source 239.0.0.0 0.255.255.255
[SecPathA-acl-basic-2001] quit
[SecPathA] pim
[SecPathA-pim] c-bsr group 239.0.0.0 8
[SecPathA-pim] c-bsr GigabitEthernet 0/4
[SecPathA-pim] c-rp GigabitEthernet 0/4 group-policy 2001
[SecPathA-pim] quit
# On SecPath B, configure the service scope of RP advertisements and configure GigabitEthernet
0/3 as a C-BSR and C-RP of admin-scoped zone 2.
[SecPathB] acl number 2001
[SecPathB-acl-basic-2001] rule permit source 239.0.0.0 0.255.255.255
[SecPathB-acl-basic-2001] quit
[SecPathB] pim
[SecPathB-pim] c-bsr group 239.0.0.0 8
[SecPathB-pim] c-bsr GigabitEthernet 0/3
[SecPathB-pim] c-rp GigabitEthernet 0/3 group-policy 2001
[SecPathB-pim] quit
# On SecPath C, configure GigabitEthernet 0/1 as a C-BSR and C-RP in the global-scoped zone.
system-view
[SecPathC] pim
[SecPathC-pim] c-bsr global
[SecPathC-pim] c-bsr GigabitEthernet 0/1
[SecPathC-pim] c-rp GigabitEthernet 0/1
[SecPathC-pim] quit
5. Verify the configuration:
To display BSR election information and C-RP information on a firewall, use the display pim
bsr-info command. For example:
# Display BSR information and the locally configured C-RP information on SecPath A.
[SecPathA] display pim bsr-info