H3C Technologies H3C SecPath F1000-E - Manual (Page 895)

870
Task Command Remarks
Display the number of IPv6 PIM
control messages.
display pim ipv6 control-message counters
[ message-type { probe | register |
register-stop } | [ interface interface-type
interface-number | message-type { assert | bsr |
crp | graft | graft-ack | hello | join-prune |
state-refresh } ] * ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display information about
unacknowledged graft
messages.
display pim ipv6 grafts [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display IPv6 PIM information on
an interface or all interfaces.
display pim ipv6 interface [ interface-type
interface-number ] [ verbose ] [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display information about
join/prune messages to send.
display pim ipv6 join-prune mode { sm [ flags
flag-value ] | ssm } [ interface interface-type
interface-number | neighbor
ipv6-neighbor-address ] * [ verbose ] [ | { begin
| exclude | include } regular-expression ]
Available in any view
Display IPv6 PIM neighboring
information.
display pim ipv6 neighbor [ interface
interface-type interface-number |
ipv6-neighbor-address | verbose ] * [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display information about the
IPv6 PIM routing table.
display pim ipv6 routing-table
[ ipv6-group-address [ prefix-length ] |
ipv6-source-address [ prefix-length ] |
incoming-interface [ interface-type
interface-number | register ] | outgoing-interface
{ include | exclude | match } { interface-type
interface-number | register } | mode mode-type
| flags flag-value | fsm ] * [ | { begin | exclude
| include } regular-expression ]
Available in any view
Display the RP information.
display pim ipv6 rp-info [ ipv6-group-address ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view
Reset IPv6 PIM control message
counters. reset pim ipv6 control-message counters
[ interface interface-type interface-number ]
Available in user view
IPv6 PIM configuration examples
IPv6 PIM-DM configuration example
Network requirements
Receivers receive VOD information through multicast. The receiver groups of different organizations form
stub networks, and at least one receiver host exists in each stub network. The entire IPv6 PIM domain
operates in the dense mode.
Host A and Host C are IPv6 multicast receivers in two stub networks N1 and N2.