H3C Technologies H3C SecPath F1000-E - Manual (Page 904)

879
Source 1 and Source 2 send different multicast information to FF14::101. Host A receives the multicast
information from Source 1 only, and Host B receives the multicast information from Source 2 only. Source
3 sends multicast information to FF1E::202. Host C is a multicast receiver for this multicast group.
GigabitEthernet 0/2 of SecPath A acts as a C-BSR and C-RP of IPv6 admin-scoped zone 1, which serve
the IPv6 multicast groups with the Scope field value in their group addresses being 4. GigabitEthernet
0/3 of Router B acts as a C-BSR and C-RP of admin-scoped zone 2, which also serve the IPv6 multicast
groups with the Scope field value in their group addresses being 4. GigabitEthernet 0/1 of SecPath C
acts as a C-BSR and a C-RP of the global-scoped zone, which serve IPv6 multicast groups with the Scope
field value in their group addresses being 14.
MLDv1 runs between Router A, Router C, Router F, and their respective receivers.