H3C Technologies H3C SecPath F1000-E - Manual (Page 773)

748
[SecPathA-GigabitEthernet0/1] ripng 100 enable
[SecPathA-GigabitEthernet0/1] quit
[SecPathA] interface GigabitEthernet 0/2
[SecPathA-GigabitEthernet0/2] ripng 100 enable
# Enable RIP 100 and RIP 200 on SecPath B.
system-view
[SecPathB] ripng 100
[SecPathB-ripng-100] quit
[SecPathB] interface GigabitEthernet 0/2
[SecPathB-GigabitEthernet0/2] ripng 100 enable
[SecPathB-GigabitEthernet0/2] quit
[SecPathB] ripng 200
[SecPathB-ripng-200] quit
[SecPathB] interface GigabitEthernet 0/1
[SecPathB-GigabitEthernet0/1] ripng 200 enable
# Enable RIPng 200 on SecPath C.
system-view
[SecPathC] ripng 200
[SecPathC] interface GigabitEthernet 0/1
[SecPathC-GigabitEthernet0/1] ripng 200 enable
[SecPathC-GigabitEthernet0/1] quit
[SecPathC] interface GigabitEthernet 0/2
[SecPathC-GigabitEthernet0/2] ripng 200 enable
[SecPathC-GigabitEthernet0/2] quit
# Display the routing table of SecPath A.
[SecPathA] display ipv6 routing-table
Routing Table :
Destinations : 6 Routes : 6
Destination: ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 1::/64 Protocol : Direct
NextHop : 1::1 Preference: 0
Interface : GE0/2 Cost : 0
Destination: 1::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 2::/64 Protocol : Direct
NextHop : 2::1 Preference: 0
Interface : GE0/1 Cost : 0
Destination: 2::1/128 Protocol : Direct
NextHop : ::1 Preference: 0