H3C Technologies H3C SecPath F1000-E User Manual
Page 36
11
Figure 8 Assigning VLAN-interface 1 to a security zone
•
Select Vlan-interface1 from the Interface Name area.
•
Click Apply.
Host A and Host B can access the SecPath.
# Display the statistics on interface GigabitEthernet 0/1.
•
Select Device Management > Interface from the navigation tree.
•
Click interface name GigabitEthernet0/1 to view its statistics, as shown in
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS H3C SecBlade LB Cards H3C SecPath L1000-A Load Balancer