H3C Technologies H3C SecPath F1000-E - Manual (Page 901)

876
# Display IPv6 PIM configuration information on SecPath A.
[SecPathA] display pim ipv6 interface
Interface NbrCnt HelloInt DR-Pri DR-Address
GE0/1 0 30 1 1001::1
(local)
GE0/2 1 30 1 1002::2
GE0/3 1 30 1 1003::2
To display BSR election information and locally configured C-RP information in effect on a firewall,
use the display pim ipv6 bsr-info command. For example:
# Display BSR information and locally configured C-RP information in effect on SecPath A.
[SecPathA] display pim ipv6 bsr-info
Elected BSR Address: 1003::2
Priority: 20
Hash mask length: 128
State: Accept Preferred
Uptime: 00:04:22
Expires: 00:01:46
# Display BSR information and locally configured C-RP information in effect on SecPath B.
[SecPathB] display pim ipv6 bsr-info
Elected BSR Address: 1003::2
Priority: 20
Hash mask length: 128
State: Elected
Uptime: 00:05:26
Expires: 00:01:45
Candidate BSR Address: 4002::1
Priority: 10
Hash mask length: 128
State: Candidate
Candidate RP: 4002::1(Pos5/0)
Priority: 192
HoldTime: 130
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:48
# Display BSR information on SecPath C and locally configured C-RP information in effect.
[SecPathC] display pim ipv6 bsr-info
Elected BSR Address: 1003::2
Priority: 20
Hash mask length: 128
State: Elected
Uptime: 00:01:10
Next BSR message scheduled at: 00:01:48
Candidate BSR Address: 1003::2
Priority: 20
Hash mask length: 128
State: Elected