H3C Technologies H3C SecPath F1000-E - Manual (Page 771)

746
[SecPathB-GigabitEthernet0/1] quit
[SecPathB] interface GigabitEthernet 0/2
[SecPathB-GigabitEthernet0/2] ripng 1 enable
[SecPathB-GigabitEthernet0/2] quit
# Configure SecPath C.
system-view
[SecPathC] ripng 1
[SecPathC-ripng-1] quit
[SecPathC] interface GigabitEthernet 0/1
[SecPathC-GigabitEthernet0/1] ripng 1 enable
[SecPathC-GigabitEthernet0/1] quit
[SecPathC] interface GigabitEthernet 0/2
[SecPathC-GigabitEthernet0/2] ripng 1 enable
[SecPathC-GigabitEthernet0/2] quit
[SecPathC] interface GigabitEthernet 0/3
[SecPathC-GigabitEthernet0/3] ripng 1 enable
[SecPathC-GigabitEthernet0/3] quit
# Display the routing table of SecPath B.
[SecPathB] display ripng 1 route
Route Flags: A - Aging, S - Suppressed, G - Garbage-collect
----------------------------------------------------------------
Peer FE80::20F:E2FF:FE23:82F5 on GigabitEthernet0/1
Dest 1::/64,
via FE80::20F:E2FF:FE23:82F5, cost 1, tag 0, A, 6 Sec
Dest 2::/64,
via FE80::20F:E2FF:FE23:82F5, cost 1, tag 0, A, 6 Sec
Peer FE80::20F:E2FF:FE00:100 on GigabitEthernet0/2
Dest 3::/64,
via FE80::20F:E2FF:FE00:100, cost 1, tag 0, A, 11 Sec
Dest 4::/64,
via FE80::20F:E2FF:FE00:100, cost 1, tag 0, A, 11 Sec
Dest 5::/64,
via FE80::20F:E2FF:FE00:100, cost 1, tag 0, A, 11 Sec
3. Configure SecPath B to filter incoming and outgoing routes:
[SecPathB] acl ipv6 number 2000
[SecPathB-acl6-basic-2000] rule deny source 3::/64
[SecPathB-acl6-basic-2000] rule permit
[SecPathB-acl6-basic-2000] quit
[SecPathB] ripng 1
[SecPathB-ripng-1] filter-policy 2000 import
[SecPathB-ripng-1] filter-policy 2000 export
# Display routing tables of SecPath B and SecPath A.
[SecPathB] display ripng 1 route
Route Flags: A - Aging, S - Suppressed, G - Garbage-collect
----------------------------------------------------------------