H3C Technologies H3C SecPath F1000-E - Manual (Page 323)

298
Task Command Remarks
Display QoS policy configuration
on the specified or all interfaces.
display qos policy interface [ interface-type
interface-number ] [ inbound | outbound ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Configuring line rate on a port
Select Firewall > QoS > Line rate from the navigation tree and click the Setup tab to enter the line rate
configuration page, as shown in
Figure 191 .
Figure 191 Configuring line rate on a port
Table 54 Configuration items
Item Description
Please select an
interface type
Select the interface type to be configured with line rate.
Rate Limit Enable or disable line rate on the specified port.
Direction Select a direction in which the line rate is to be applied.