Figure 94 – H3C Technologies H3C SecPath F1000-E User Manual

Page 186

background image

161

Figure 94 Enabling the DHCP service

•

Select the Enable option in the DHCP Service field.

# Configure a static address pool.

•

Click Add in the Address Pool field and perform the following configuration, as shown in

By default, the Static option is selected.

This manual is related to the following products:

H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS H3C SecBlade LB Cards H3C SecPath L1000-A Load Balancer