H3C Technologies H3C SecPath F1000-E - Manual (Page 376)

351
Select Network > Routing Management > Routing Info from the navigation tree of SecPath A to
display learned RIP route destined for 10.0.0.0/8.
Figure 245 RIP configuration result I
2. Display active routes of SecPath B:
Select Network > Routing Management > Routing Info from the navigation tree of SecPath B to
display learned RIP routes destined for 2.0.0.0/8 and 3.0.0.0/8.
Figure 246 RIP configuration result II
Configuring RIP at the CLI
RIP configuration task list
Item Description
Configuring RIP basic functions Required
Configuring RIP
route control
Configuring an additional routing metric Optional
Configuring RIPv2 route summarization Optional
Disabling host route reception Optional
Advertising a default route Optional