H3C Technologies H3C SecPath F1000-E - Manual (Page 391)

366
2. Configure RIP basic functions:
# Enable RIP 100, and configure a RIP version of 2 on SecPath A.
system-view
[SecPathA] rip 100
[SecPathA-rip-100] network 10.0.0.0
[SecPathA-rip-100] network 11.0.0.0
[SecPathA-rip-100] version 2
[SecPathA-rip-100] undo summary
[SecPathA-rip-100] quit
# Enable RIP 100 and RIP 200, configure RIP version as 2 on SecPath B.
system-view
[SecPathB] rip 100
[SecPathB-rip-100] network 11.0.0.0
[SecPathB-rip-100] version 2
[SecPathB-rip-100] undo summary
[SecPathB-rip-100] quit
[SecPathB] rip 200
[SecPathB-rip-200] network 12.0.0.0
[SecPathB-rip-200] version 2
[SecPathB-rip-200] undo summary
[SecPathB-rip-200] quit
# Enable RIP 200 and configure RIP version as 2 on SecPath C.
system-view
[SecPathC] rip 200
[SecPathC-rip-200] network 12.0.0.0
[SecPathC-rip-200] network 16.0.0.0
[SecPathC-rip-200] version 2
[SecPathC-rip-200] undo summary
# Display the routing table of SecPath C.
[SecPathC] display ip routing-table
Routing Tables: Public
Destinations : 6 Routes : 6
Destination/Mask Proto Pre Cost NextHop Interface
12.3.1.0/24 Direct 0 0 12.3.1.2 GE0/1
12.3.1.2/32 Direct 0 0 127.0.0.1 InLoop0
16.4.1.0/24 Direct 0 0 16.4.1.1 GE0/2
16.4.1.1/32 Direct 0 0 127.0.0.1 InLoop0
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0
127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0
3. Configure RIP route redistribution:
# Configure RIP 200 to redistribute direct routes and routes from RIP 100 on SecPath B.
[SecPathB] rip 200
[SecPathB-rip-200] import-route rip 100
[SecPathB-rip-200] import-route direct
[SecPathB-rip-200] quit
# Display the routing table of SecPath C.
[SecPathC] display ip routing-table