H3C Technologies H3C SecPath F1000-E User Manual
Page 278
253
[SecPath-vlan-interface10] ip address 192.168.1.2 8
[SecPath-vlan-interface10] quit
# Configure a static ARP entry that has IP address 192.168.1.1, MAC address 00e0-fc01-0000, and
output interface GigabitEthernet 0/1 in VLAN 10.
[SecPath] arp static 192.168.1.1 00e0-fc01-0000 10 GigabitEthernet 0/1
# View information about static ARP entries.
[SecPath] display arp static
Type: S-Static D-Dynamic
IP Address MAC Address VLAN ID Interface Aging Type
192.168.1.1 00e0-fc01-0000 10 GE0/1 N/A S
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS H3C SecBlade LB Cards H3C SecPath L1000-A Load Balancer