H3C Technologies H3C SecPath F1000-E - Manual (Page 61)

36
Figure 27 Displaying the port statistics of GigabitEthernet 0/1
Configuring VLANs at the CLI
Configuring basic VLAN settings
Step Command Remarks
1. Enter system view. system-view N/A
2. Create VLANs.
vlan { vlan-id1 [ to vlan-id2 ] |
all } Optional.
Use this command to create VLANs in bulk.
3. Enter VLAN view. vlan vlan-id
By default, only the default VLAN (VLAN 1)
exists in the system.
If the specified VLAN does not exist, this
command creates the VLAN first.
4. Configure a name for
the VLAN.
name text
Optional.
By default, the name of a VLAN is its VLAN
ID. For example, VLAN 0001.