H3C Technologies H3C SecPath F1000-E - Manual (Page 352)

327
Step Command Remarks
3. Enter interface view. interface interface-type interface-number N/A
4. Configure an ACL
based CAR policy on
the interface.
qos car { inbound | outbound } acl [ ipv6 ] acl-number
cir committed-information-rate [ cbs
committed-burst-size [ ebs excess-burst-size ] ] [ green
action ] [ red action ]
N/A
3. Configuring traffic policing for all traffic
Step Command
1. Enter system view. system-view
2. Enter interface view. interface interface-type interface-number
3. Configure a CAR action for
all traffic on the interface.
qos car { inbound | outbound } any cir committed-information-rate [ cbs
committed-burst-size [ ebs excess-burst-size ] ] [ green action ] [ red action ]
Displaying and maintaining traffic policing
Task Command Remarks
Display CAR list information.
display qos carl [ carl-index ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display the CAR information on
the specified interface.
display qos car interface
[ interface-type interface-number ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view