H3C Technologies H3C SecPath F1000-E - Manual (Page 727)

702
# Enable IPv6 for Host to obtain an IPv6 address automatically through IPv6 ND.
# Display the neighbor information of GigabitEthernet 0/2 on Router A.
[RouterA] display ipv6 neighbors interface GigabitEthernet 0/2
Type: S-Static D-Dynamic
IPv6 Address Link-layer VID Interface State T Age
FE80::215:E9FF:FEA6:7D14 0015-e9a6-7d14 N/A GE0/2 STALE D 1238
2001::15B:E0EA:3524:E791 0015-e9a6-7d14 N/A GE0/2 STALE D 1248
The output shows that the IPv6 global unicast address that Host obtained is
2001::15B:E0EA:3524:E791.
Verifying the configuration
# Display the IPv6 interface information on Router A. All the IPv6 global unicast addresses configured on
the interface are displayed.
[RouterA] display ipv6 interface GigabitEthernet 0/1
GigabitEthernet0/1 current state :UP
Line protocol current state :UP
IPv6 is enabled, link-local address is FE80::20F:E2FF:FE00:2
Global unicast address(es):
3001::1, subnet is 3001::/64
Joined group address(es):
FF02::1:FF00:0
FF02::1:FF00:1
FF02::1:FF00:2
FF02::2
FF02::1
MTU is 1500 bytes
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
Hosts use stateless autoconfig for addresses
IPv6 Packet statistics:
InReceives: 25829
InTooShorts: 0
InTruncatedPkts: 0
InHopLimitExceeds: 0
InBadHeaders: 0
InBadOptions: 0
ReasmReqds: 0
ReasmOKs: 0
InFragDrops: 0
InFragTimeouts: 0
OutFragFails: 0
InUnknownProtos: 0
InDelivers: 47
OutRequests: 89
OutForwDatagrams: 48
InNoRoutes: 0