Configuring the dns server address, Configuring ddns – H3C Technologies H3C SecPath F1000-E User Manual
Page 260
235
Figure 145 Enabling dynamic domain name resolution
2.
Select the Enable option for Dynamic DNS.
3.
Click Apply.
Configuring the DNS server address
1.
Select Network > DNS > Dynamic from the navigation tree, and then click Add IP. Perform the
following operations, as shown in
.
Figure 146 Configuring the DNS server address
2.
Enter 1.1.1.1 in DNS Server IP Address.
3.
Click Apply.
Configuring DDNS
1.
Select Network > DNS > DDNS from the navigation tree, and then click Add. Perform the following
operations, as shown in
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS H3C SecBlade LB Cards H3C SecPath L1000-A Load Balancer