H3C Technologies H3C SecPath F1000-E - Manual (Page 769)

744
packets on the interface. If an interface and its process each have an IPsec policy configured, the
interface uses its own IPsec policy.
Configuration prerequisites
Before applying an IPsec policy for RIPng, complete the following tasks.
• Create an IPsec proposal.
• Create an IPsec policy.
For more information about IPsec policy configuration, see VPN Configuration Guide.
Configuration guidelines
An IPsec policy used for RIPng can only be in manual mode. For more information, see VPN
Configuration Guide.
Configuration procedure
To apply an IPsec policy in a process:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter RIPng view.
ripng [ process-id ] [ vpn-instance
vpn-instance-name ]
N/A
3. Apply an IPsec policy in the
process.
enable ipsec-policy policy-name Not configured by default.
To apply an IPsec policy on an interface:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Apply an IPsec policy on the
interface.
ripng ipsec-policy policy-name Not configured by default.
Displaying and maintaining RIPng
Task Command Remarks
Display configuration information
of a RIPng process.
display ripng [ process-id ]
[ vpn-instance vpn-instance-name ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view
Display routes in the RIPng
database.
display ripng process-id database
[ | { begin | exclude | include }
regular-expression ]
Available in any view
Display the routing information of
a specified RIPng process.
display ripng process-id route [ |
{ begin | exclude | include }
regular-expression ]
Available in any view