H3C Technologies H3C SecPath F1000-E - Manual (Page 624)

599
[SecPathD] pim
[SecPathD-pim] ssm-policy 2000
[SecPathD-pim] quit
The configuration on SecPath A, SecPath B and SecPath C is similar to that on SecPath D.
5. Configure IGMP SSM mappings:
# Configure IGMP SSM mappings on SecPath D.
[SecPathD] igmp
[SecPathD-igmp] ssm-mapping 232.1.1.0 24 133.133.1.1
[SecPathD-igmp] ssm-mapping 232.1.1.0 24 133.133.3.1
[SecPathD-igmp] quit
6. Verify the configuration:
Use the display igmp ssm-mapping command to display IGMP SSM mappings on the firewalls.
# Display the IGMP SSM mapping information for multicast group 232.1.1.1 on the public
network on SecPath D.
[SecPathD] display igmp ssm-mapping 232.1.1.1
Group: 232.1.1.1
Source list:
133.133.1.1
133.133.3.1
Use the display igmp ssm-mapping group command on the firewalls to display multicast group
information created based on the configured IGMP SSM mappings.
# Display the multicast group information created based on the configured IGMP SSM mappings
on the public network on SecPath D.
[SecPathD] display igmp ssm-mapping group
Total 1 IGMP SSM-mapping Group(s).
GigabitEthernet0/1(133.133.4.2):
Total 1 IGMP SSM-mapping Group reported
Group Address Last Reporter Uptime Expires
232.1.1.1 133.133.4.1 00:02:04 off
Use the display pim routing-table command to display PIM routing table information on each
firewall.
# Display the PIM routing table information on the public network on SecPath D.
[SecPathD] display pim routing-table
Total 0 (*, G) entry; 2 (S, G) entry
(133.133.1.1, 232.1.1.1)
Protocol: pim-ssm, Flag:
UpTime: 00:13:25
Upstream interface: GigabitEthernet0/3
Upstream neighbor: 192.168.4.2
RPF prime neighbor: 192.168.4.2
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet0/1
Protocol: igmp, UpTime: 00:13:25, Expires: -
(133.133.3.1, 232.1.1.1)
Protocol: pim-ssm, Flag: