H3C Technologies H3C SecPath F1000-E - Manual (Page 103)

78
Figure 50 Configure an MST region on SecPath
{
Configure the region name as example.
{
Set the revision level to 0.
{
Select the Manual option.
{
Select 1 from the Instance ID list.
{
Set the VLAN ID to 10.
{
Click Apply.
{
Repeat the previous steps to map VLAN 30 to MSTI 3 and VLAN 40 to MSTI 4.
{
Click Activate.
# Enable MSTP globally and configure the current device as the root bridge of MSTI 1.
{
Select Network > MSTP > Global from the navigation tree, and make the following
configurations on the page shown in
Figure 51 .