Configuring the dns client – H3C Technologies H3C SecPath F1000-E User Manual
Page 252
227
Figure 138 Adding a host
, right click zone com, and then select New Host to bring up a dialog box as shown in
. Enter host name host and IP address 3.1.1.1.
Figure 139 Adding a mapping between domain name and IP address
Configuring the DNS client
# Enable dynamic domain name resolution.
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS H3C SecBlade LB Cards H3C SecPath L1000-A Load Balancer