H3C Technologies H3C SecPath F1000-E User Manual

Page 559

534

[SecPathC] interface GigabitEthernet 4/3

[SecPathC-GigabitEthernet4/3] isis enable 1

[SecPathC-GigabitEthernet4/3] quit

# Configure SecPath D.

system-view

[SecPathD] isis 1

[SecPathD-isis-1] network-entity 20.0000.0000.0001.00

[SecPathD-isis-1] quit

[SecPathD] interface GigabitEthernet 4/1

[SecPathD-GigabitEthernet4/1] isis enable 1

[SecPathD-GigabitEthernet4/1] quit

Configure neighbor relationship authentication between neighbors:
# Specify the MD5 authentication mode and password eRq on GigabitEthernet 4/1 of SecPath A
and on GigabitEthernet 4/3 of SecPath C.

[SecPathA] interface GigabitEthernet 4/1

[SecPathA-GigabitEthernet4/1] isis authentication-mode md5 eRg

[SecPathA-GigabitEthernet4/1] quit

[SecPathC] interface GigabitEthernet 4/3

[SecPathC-GigabitEthernet4/3] isis authentication-mode md5 eRg

[SecPathC-GigabitEthernet4/3] quit

# Specify the MD5 authentication mode and password t5Hr on GigabitEthernet 4/1 of SecPath B
and on GigabitEthernet 4/1 of SecPath C.

[SecPathB] interface GigabitEthernet 4/1

[SecPathB-GigabitEthernet4/1] isis authentication-mode md5 t5Hr

[SecPathB-GigabitEthernet4/1] quit

[SecPathC] interface GigabitEthernet 4/1

[SecPathC-GigabitEthernet4/1] isis authentication-mode md5 t5Hr

[SecPathC-GigabitEthernet4/1] quit

# Specify the MD5 authentication mode and password hSec on GigabitEthernet 4/2 of SecPath C

and on GigabitEthernet 4/1 of SecPath D.

[SecPathC] interface GigabitEthernet 4/2

[SecPathC-GigabitEthernet4/2] isis authentication-mode md5 hSec

[SecPathC-GigabitEthernet4/2] quit

[SecPathD] interface GigabitEthernet 4/1

[SecPathD-GigabitEthernet4/1] isis authentication-mode md5 hSec

[SecPathD-GigabitEthernet4/1] quit

Configure area authentication. Specify the MD5 authentication mode and password 10Sec on

SecPath A, SecPath B and SecPath C:

[SecPathA] isis 1

[SecPathA-isis-1] area-authentication-mode md5 10Sec

[SecPathA-isis-1] quit

[SecPathB] isis 1

[SecPathB-isis-1] area-authentication-mode md5 10Sec

[SecPathB-isis-1] quit

[SecPathC] isis 1

[SecPathC-isis-1] area-authentication-mode md5 10Sec

[SecPathC-isis-1] quit

This manual is related to the following products:

H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS H3C SecBlade LB Cards H3C SecPath L1000-A Load Balancer