H3C Technologies H3C SecPath F1000-E - Manual (Page 196)

171
domain name, and the system will add the domain name suffix for name resolution. For more information
about DNS, see "Configuring DNS."
To configure a domain name suffix in the DHCP address pool:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter DHCP address pool view.
dhcp server ip-pool pool-name
[ extended ]
N/A
3. Specify a domain name suffix. domain-name domain-name Not specified by default.
Configuring DNS servers for the client
A DHCP client contacts a Domain Name System (DNS) server to resolve names. You can specify up to
eight DNS servers in the DHCP address pool.
To configure DNS servers in the DHCP address pool:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter DHCP address pool
view.
dhcp server ip-pool pool-name
[ extended ]
N/A
3. Specify DNS servers. dns-list ip-address&<1-8> Not specified by default.
Configuring WINS servers and NetBIOS node type for the client
A Microsoft DHCP client using NetBIOS protocol contacts a Windows Internet Naming Service (WINS)
server for name resolution. Therefore, the DHCP server should assign a WINS server address when
assigning an IP address to the client.
You can specify up to eight WINS servers in a DHCP address pool.
You need to specify in a DHCP address pool a NetBIOS node type for the client to approach name
resolution. There are four NetBIOS node types:
• b (broadcast)-node—The b-node client sends the destination name in a broadcast message. The
destination returns its IP address to the client after receiving the message.
• p (peer-to-peer)-node—The p-node client sends the destination name in a unicast message to the
WINS server, and the WINS server returns the destination IP address.
• m (mixed)-node—A combination of broadcast first and peer-to-peer second. The m-node client
broadcasts the destination name. If no response is received, it unicasts the destination name to the
WINS server to get the destination IP address.
• h (hybrid)-node—A combination of peer-to-peer first and broadcast second. The h-node client
unicasts the destination name to the WINS server. If no response is received, it broadcasts it to get
the destination IP address.
To configure WINS servers and NetBIOS node type in the DHCP address pool:
Step Command Remarks
1. Enter system view. system-view N/A