H3C Technologies H3C SecPath F1000-E - Manual (Page 898)

873
A to join IPv6 multicast group G, and a (*, G) entry is generated on Router A. To display IPv6 PIM
routing information on routers and the firewall, use the display pim ipv6 routing-table command.
For example:
# Display IPv6 PIM multicast routing table information on Router A.
[RouterA] display pim ipv6 routing-table
Total 1 (*, G) entry; 1 (S, G) entry
(*, FF0E::101)
Protocol: pim-dm, Flag: WC
UpTime: 00:01:24
Upstream interface: NULL
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet0/1
Protocol: mld, UpTime: 00:01:20, Expires: never
(4001::100, FF0E::101)
Protocol: pim-dm, Flag: ACT
UpTime: 00:01:20
Upstream interface: GigabitEthernet0/2
Upstream neighbor: 1002::2
RPF prime neighbor: 1002::2
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet0/1
Protocol: pim-dm, UpTime: 00:01:20, Expires: never
# Display IPv6 PIM multicast routing table information on SecPath.
[SecPath] display pim ipv6 routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(4001::100, FF0E::101)
Protocol: pim-dm, Flag: LOC ACT
UpTime: 00:02:19
Upstream interface: GigabitEthernet0/1
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 3
1: GigabitEthernet0/2
Protocol: pim-dm, UpTime: 00:02:19, Expires: never
2: GigabitEthernet0/3
Protocol: pim-dm, UpTime: 00:02:19, Expires: never
3: GigabitEthernet0/4
Protocol: pim-dm, UpTime: 00:02:19, Expires: never