H3C Technologies H3C SecPath F1000-E User Manual
Page 471
446
Figure 281 Enabling BGP
b.
Select the Enable BGP box, and enter 65009 for AS.
c.
Click Apply.
After you enable BGP, the following figure appears.
Figure 282 The web page displayed after you enable BGP
d.
Click Add in the Peer Configuration field.
The BGP configuration page appears.
Figure 283 Adding a BGP peer
e.
Enter 9.1.1.2 for Peer IP Address, and enter 65009 for Peer AS.
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS H3C SecBlade LB Cards H3C SecPath L1000-A Load Balancer