H3C Technologies H3C SecPath F1000-E - Manual (Page 325)

300
Figure 193 Creating ACL 2000
{
Enter 2000 as the ACL number.
{
Select Config from the Match Order list.
{
Click Apply.
{
Click the icon for ACL 2000 on the ACL list, and click Add. Perform configuration on the
page shown in Figure 194 .
Figure 194 Configuring rules for ACL 2000
{
Select Permit from the Operation list.
{
Select the Source IP Address box, enter 1.1.1.1 as the source IP address, and 0.0.0.0 as the
source wildcard.
{
Click Apply.
# Configure ACL 2001 to match traffic from Host.
{
Select Firewall > ACL from the navigation tree, and click Add. Perform configuration on the
page shown in
Figure 193 .
{
Enter 2001 as the ACL number.
{
Click Apply.
{
Click the icon for ACL 2001 on the ACL list, and click Add. Perform configuration on the
page shown in Figure 194 .
{
Select Permit from the Operation list.
{
Select the Source IP Address box, enter 1.1.1.2 as the source IP address, and 0.0.0.0 as the
source wildcard.