H3C Technologies H3C SecPath F1000-E - Manual (Page 109)

84
Task Remarks
Configuring path costs of ports Optional.
Configuring the port priority Optional.
Configuring the port link type Optional.
Configuring the mode a port uses to recognize/send
MSTP packets
Optional.
Enabling the spanning tree feature Required.
Performing mCheck Optional.
Configuring protection functions Optional.
Complete the following tasks to configure MSTP:
Task Remarks
Configuring the root
bridge
Setting the spanning tree mode
Optional.
By default, the device works
in MSTP mode.
Configuring an MST region Required.
Configuring the root bridge or a secondary root
bridge
Optional.
Configuring the device priority Optional.
Configuring the maximum hops of an MST region Optional.
Configuring the network diameter of a switched
network
Optional.
Configuring spanning tree timers Optional.
Configuring the timeout factor Optional.
Configuring the maximum port rate Optional.
Configuring edge ports Optional.
Configuring the port link type Optional.
Configuring the mode a port uses to recognize/send
MSTP packets
Optional.
Enabling the spanning tree feature Required.
Configuring the leaf
nodes
Setting the spanning tree mode
Optional.
By default, the device works
in MSTP mode.
Configuring an MST region Required.
Configuring the device priority Optional.
Configuring the timeout factor Optional.
Configuring the maximum port rate Optional.
Configuring edge ports Optional.
Configuring path costs of ports Optional.