H3C Technologies H3C SecPath F1000-E - Manual (Page 544)

519
Step Command Remarks
3. Specify the routing domain
authentication mode and
password.
domain-authentication-mode
{ md5 | simple } password [ ip |
osi ]
By default, no routing domain
authentication is configured.
Enabling IS-IS SNMP trap
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter IS-IS view. isis [ process-id ] [ vpn-instance vpn-instance-name ] N/A
3. Enable SNMP trap. is-snmp-traps enable Enabled by default.
Binding an IS-IS process with MIBs
To bind an IS-IS process with MIBs:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter IS-IS view.
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
N/A
3. Bind the IS-IS process with
MIBs.
isis mib-binding process-id
By default, MIBs are bound with
IS-IS process 1.
Displaying and maintaining IS-IS
Task Command Remarks
Display brief IS-IS configuration
information.
display isis brief [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view
Display the status of IS-IS debug
switches.
display isis debug-switches { process-id |
vpn-instance vpn-instance-name } [ | { begin |
exclude | include } regular-expression ]
Available in any
view
Display information about IS-IS
enabled interfaces.
display isis interface [ statistics | [ interface-type
interface-number ] [ verbose ] ] [ process-id |
vpn-instance vpn-instance-name ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view
Display IS-IS LSDB information.
display isis lsdb [ [ l1 | l2 | level-1 | level-2 ] |
[ lsp-id lspid | lsp-name lspname ] | local |
verbose ] * [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view