H3C Technologies H3C SecPath F1000-E User Manual
Page 209
184
3.
Enable the network adapter or connect the network cable. Release the IP address and obtain
another one on the client. For example, to release the IP address and obtain another one on a
Windows XP client:
4.
Select Start > Run, type cmd, and press Enter.
5.
Enter ipconfig/release to relinquish the IP address.
6.
Enter ipconfig/renew to obtain another IP address.
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS H3C SecBlade LB Cards H3C SecPath L1000-A Load Balancer