H3C Technologies H3C SecPath F1000-E User Manual
Page 560
535
5.
Configure routing domain authentication. Specify the MD5 authentication mode and password
1020Sec on SecPath C and SecPath D:
[SecPathC] isis 1
[SecPathC-isis-1] domain-authentication-mode md5 1020Sec
[SecPathC-isis-1] quit
[SecPathD] isis 1
[SecPathD-isis-1] domain-authentication-mode md5 1020Sec
[SecPathD-isis-1] isis 1
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS H3C SecBlade LB Cards H3C SecPath L1000-A Load Balancer