H3C Technologies H3C SecPath F1000-E - Manual (Page 473)

448
Verifying the configuration
# Display the BGP peer connection state of SecPath.
Select Network > Routing Management > BGP from the navigation tree of SecPath, and then click Show
Peer in the Show Information field. BGP connections are established from SecPath to other devices, as
shown in Figure 284 .
Figure 284 BGP configuration result
Configuring BGP at the CLI
BGP configuration task list
Task Remarks
Configuring BGP basic
functions
Creating a BGP connection Required.
Specifying the source interface for TCP connections Optional.
Allowing establishment of EBGP connection to an indirectly
connected peer/peer group
Optional.
Controlling route
generation
Injecting a local network Required.
Use at least one
approach.
Configuring BGP route redistribution
Enabling default route redistribution into BGP Optional.
Controlling route
distribution and
reception
Configuring BGP route summarization
Optional.
Advertising a default route to a peer or peer group
Configuring BGP route distribution/reception filtering policies
Enabling BGP and IGP route synchronization
Limiting prefixes received from a peer/peer group
Configuring BGP route dampening
Configuring a shortcut route
Configuring BGP route
attributes
Specifying a preferred value for routes received Optional.
Configuring preferences for BGP routes Optional.
Configuring the default local preference Optional.
Configuring the MED attribute Optional.
Configuring the next hop attribute Optional.
Configuring the AS-PATH attribute Optional.