Network requirements – H3C Technologies H3C SecPath F1000-E User Manual
Page 903
878
Protocol: pim-sm, Flag: SPT ACT
UpTime: 00:02:15
Upstream interface: GigabitEthernet0/2
Upstream neighbor: 1002::2
RPF prime neighbor: 1002::2
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet0/1
Protocol: pim-sm, UpTime: 00:02:15, Expires: 00:03:06
# Display IPv6 PIM multicast routing table information on SecPath B.
[SecPathB] display pim ipv6 routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(4001::100, FF0E::100)
RP: 1003::2
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 00:14:44
Upstream interface: GigabitEthernet0/1
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet0/3
Protocol: mld, UpTime: 00:14:44, Expires: 00:02:26
# Display IPv6 PIM routing table information on SecPath C.
[SecPathC] display pim ipv6 routing-table
Total 1 (*, G) entry; 0 (S, G) entry
(*, FF0E::100)
RP: 1003::2 (local)
Protocol: pim-sm, Flag: WC
UpTime: 00:16:56
Upstream interface: Register
Upstream neighbor: 4002::1
RPF prime neighbor: 4002::1
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet0/3
Protocol: pim-sm, UpTime: 00:16:56, Expires: 00:02:34
IPv6 PIM-SM admin-scoped zone configuration example
Network requirements
Receivers receive VOD information through multicast. The entire IPv6 PIM-SM domain is divided into IPv6
admin-scoped zone 1, IPv6 admin-scoped zone 2, and the IPv6 global-scoped zone. SecPath A, SecPath
B, and Router B are ZBRs of the three domains respectively.
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS H3C SecBlade LB Cards H3C SecPath L1000-A Load Balancer