H3C Technologies H3C SecPath F1000-E - Manual (Page 938)

913
[SecPath] pim ipv6
[SecPath-pim6] ssm-policy 2000
[SecPath-pim6] quit
The configuration on Router A, Router B and Router C is similar to that on SecPath.
5. Configure MLD SSM mappings:
# Configure MLD SSM mappings on SecPath.
[SecPath] mld
[SecPath-mld] ssm-mapping ff3e:: 64 1001::1
[SecPath-mld] ssm-mapping ff3e:: 64 3001::1
[SecPath-mld] quit
6. Verify the configuration:
Use the display mld ssm-mapping command to display MLD SSM mappings on routers and the
firewall.
# Display MLD SSM mapping information for IPv6 multicast group FF3E::101 on SecPath.
[SecPath] display mld ssm-mapping ff3e::101
Group: FF3E::101
Source list:
1001::1
3001::1
Use the display mld ssm-mapping group command to display IPv6 multicast group information
created based on the configured MLD SSM mappings.
# Display IPv6 multicast group information created based on the configured MLD SSM mappings
on SecPath.
[SecPath] display mld ssm-mapping group
Total 1 MLD SSM-mapping Group(s).
Interface group report information
GigabitEthernet0/1(4001::2):
Total 1 MLD SSM-mapping Group reported
Group Address: FF3E::101
Last Reporter: 4001::1
Uptime: 00:02:04
Expires: off
Use the display pim ipv6 routing-table command to display IPv6 PIM routing table information on
routers and the firewall.
# Display IPv6 PIM routing table information on SecPath.
[SecPath] display pim ipv6 routing-table
Total 0 (*, G) entry; 2 (S, G) entry
(1001::1, FF3E::101)
Protocol: pim-ssm, Flag:
UpTime: 00:13:25
Upstream interface: GigabitEthernet0/3
Upstream neighbor: 1003::1
RPF prime neighbor: 1003::1
Downstream interface(s) information:
Total number of downstreams: 1