H3C Technologies H3C SecPath F1000-E - Manual (Page 393)

368
Figure 249 Network diagram
Configuration procedure
1. Configure IP addresses for the interfaces. (Details not shown)
2. Configure RIP basic functions:
# Configure SecPath.
system-view
[SecPath] rip
[SecPath-rip-1] network 1.0.0.0
[SecPath-rip-1] version 2
[SecPath-rip-1] undo summary
[SecPath-rip-1] quit
# Configure Router B.
system-view
[RouterB] rip
[RouterB-rip-1] network 1.0.0.0
[RouterB-rip-1] version 2
[RouterB-rip-1] undo summary
# Configure Router C.
system-view
[RouterB] rip
[RouterC-rip-1] network 1.0.0.0
[RouterC-rip-1] version 2
[RouterC-rip-1] undo summary
# Configure Router D.
system-view
[RouterD] rip
[RouterD-rip-1] network 1.0.0.0
[RouterD-rip-1] version 2
[RouterD-rip-1] undo summary
# Configure Router A.
system-view
[RouterA] rip
[RouterA-rip-1] network 1.0.0.0
[RouterA-rip-1] version 2
[RouterA-rip-1] undo summary
# Display the IP routing table of SecPath.
Router B
Router C
Router A Router D
GE0/1
1.1.1.1/24
GE0/1
1.1.1.2/24
GE0/2
1.1.2.1/24
GE0/1
1.1.2.2/24
GE0/2
1.1.3.1/24
GE0/2
1.1.4.1/24
GE0/2
1.1.3.2/24
GE0/1
1.1.4.2/24
GE0/3
1.1.5.1/24
GE0/1
1.1.5.2/24
SecPath