H3C Technologies H3C SecPath F1000-E - Manual (Page 330)

305
Priority marking configuration example
Network requirements
As shown in Figure 203 , configure a priority marking QoS policy on SecPath to satisfy the following
requirements:
Traffic source Destination Processing priority
Host A, B Data server High
Host A, B Mail server Medium
Host A, B File server Low
Figure 203 Network diagram
Configuration procedure
1. Configure ACLs:
# Configure ACL 3000 to match packets with destination address 192.168.0.1.
{
Select Firewall > ACL from the navigation tree and then click Add. Perform configuration on the
page as shown in
Figure 204 .
Figure 204 Creating ACL 3000
{
Enter the ACL number 3000.