H3C Technologies H3C SecPath F1000-E - Manual (Page 552)

527
---------------------------------
Interface: GigabitEthernet4/1
Id IPV4.State IPV6.State MTU Type DIS
001 Up Down 1497 L1/L2 No/No
# Display IS-IS interfaces of SecPath C.
[SecPathC] display isis interface
Interface information for ISIS(1)
---------------------------------
Interface: GigabitEthernet4/1
Id IPV4.State IPV6.State MTU Type DIS
001 Up Down 1497 L1/L2 Yes/No
# Display information about IS-IS interfaces of SecPath D.
[SecPathD] display isis interface
Interface information for ISIS(1)
---------------------------------
Interface: GigabitEthernet4/1
Id IPV4.State IPV6.State MTU Type DIS
001 Up Down 1497 L1/L2 No/Yes
By using the default DIS priority, SecPath C is the Level-1 DIS, and SecPath D is the Level-2 DIS. The
pseudonodes of Level-1 and Level-2 are 0000.0000.0003.01 and 0000.0000.0004.01,
respectively.
3. Configure the DIS priority of SecPath A:
[SecPathA] interface GigabitEthernet 4/1
[SecPathA-GigabitEthernet4/1] isis dis-priority 100
# Display information about IS-IS neighbors of SecPath A.
[SecPathA] display isis peer
Peer information for ISIS(1)
----------------------------
System Id: 0000.0000.0002
Interface: GigabitEthernet4/1 Circuit Id: 0000.0000.0001.01
State: Up HoldTime: 29s Type: L1(L1L2) PRI: 64
System Id: 0000.0000.0003
Interface: GigabitEthernet4/1 Circuit Id: 0000.0000.0001.01
State: Up HoldTime: 22s Type: L1 PRI: 64
System Id: 0000.0000.0002
Interface: GigabitEthernet4/11 Circuit Id: 0000.0000.0001.01
State: Up HoldTime: 22s Type: L2(L1L2) PRI: 64
System Id: 0000.0000.0004
Interface: GigabitEthernet4/1 Circuit Id: 0000.0000.0001.01
State: Up HoldTime: 22s Type: L2 PRI: 64