H3C Technologies H3C SecPath F1000-E - Manual (Page 188)

163
• The IP addresses of GigabitEthernet 0/1 and GigabitEthernet 0/2 on the SecPath are 10.1.1.1/25
and 10.1.1.129/25 respectively.
• Address pool 10.1.1.0/25 has the address lease duration ten days and twelve hours, domain name
suffix aabbcc.com, DNS server address 10.1.1.2/25, WINS server address 10.1.1.4/25, and
gateway address 10.1.1.126/25.
• Address pool 10.1.1.128/25 has the address lease duration five days, domain name suffix
aabbcc.com, DNS server address 10.1.1.2/25, and gateway address 10.1.1.254/25 and has no
WINS server address.
• The domain name suffix and DNS server address in address pools 10.1.1.0/25 and 10.1.1.128/25
are the same. Therefore, the domain name suffix and DNS server address need to be configured
only for subnet 10.1.1.0/24. Subnet 10.1.1.0/25 and 10.1.1.128/25 can inherit the configuration of
subnet 10.1.1.0/24.
NOTE:
In this example, the number of requesting clients connected to GigabitEthernet 0/1 should be less than
122, and that of clients connected to GigabitEthernet 0/2 should be less than 124.
Figure 97 Network diagram
Configuration procedure
# Specify IP addresses for interfaces and create security zones. (Details not shown.)
# Configure the DHCP server.
• Select Network > DHCP > DHCP Server from the navigation tree and perform the following
configuration, as shown in
Figure 98 .