H3C Technologies H3C SecPath F1000-E - Manual (Page 149)

124
Figure 63 A PPPoA network
Enabling the ignoring of next-hop address matching
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter virtual template
interface view.
interface virtual-template number N/A
3. Enable the ignoring of
next-hop address matching.
ppp ignore match-next-hop
By default, the firewall matches the
next-hop addresses.
Displaying and maintaining PPP
Task Command Remarks
Display information about an
existing VT.
display interface virtual-template number
[ brief ] [ | { begin | exclude | include }
regular-expression ]
display interface [ virtual-template ] [ brief
[ down ] ] [ | { begin | exclude | include }
regular-expression ]
Available in any view
Display status information for a
virtual access interface.
display virtual-access [ va-number | dialer
dialer-number | peer peer-address | user
user-name | vt vt-number ] *
Available in any view
Clear statistics on a specified
interface. reset counters interface [ virtual-template
[ interface-number ] ]
Available in user view