beautypg.com

H3C Technologies H3C SecPath F1000-E User Manual

Page 317

background image

292

Table 49 Configuration items

Item

Description

Behavior Name

Name of the traffic behavior being configured.

CAR

CAR

Configure CAR for data packets.

Enable/Disable

Enable or disable CAR.

CIR

Set the committed information rate
(CIR), the average traffic rate.

IMPORTANT:

For bursty traffic to be handled

effectively, make sure that the ratio
of CBS to CIR is at least 100:16.

CBS

Set the committed burst size (CBS),
number of bits that can be sent in
each interval.

Green

Discard

Set the action to perform for conforming packets (green packets), which
can be:

Discard—Drops the packets.

Pass—Permits the packets to pass through.

Pass (Remark DSCP)—Sets a specific DSCP value for the packets and

permits the packets to pass through. With this option selected, you

must select a DSCP value.

By default, conforming packets are permitted to pass through.

Pass

Pass (Remark
DSCP)

Remark

IP Precedence

Set to mark matching packets with the selected IP precedence.
Selecting Not Set disables the IP precedence marking action.

DSCP

Set to mark matching packets with the selected DSCP precedence.
Selecting Not Set disables the DSCP marking action.

Local Precedence

Set to mark matching packets with the selected local precedence.
Selecting Not Set disables local precedence marking.

Dot1p

Set to mark matching packets with the selected 802.1p priority.
Selecting Not Set disables 802.1p priority marking.

Queue

Queue

Configure CBQ for packets.
If this box is not selected, FIFO schedules packets by default.

EF

EF

Configure expedited forwarding (EF).

Max
Bandwidth

Configure the maximum bandwidth for EF.

CBS

Configure the CBS for EF when the Max Bandwidth option is selected.

Percent

Configure the percent of available bandwidth for EF.

CBS-Ratio

Configure the ratio of CBS to CIR for EF when the Percent option is
selected.

AF

AF

Configure assured forwarding (AF).

Max
Bandwidth

Configure the minimum guaranteed bandwidth for AF.

Percent

Configure the percent of available bandwidth for AF.