Yaskawa MP2000 Series: Built-in SVB or SVB-01 Motion Module - Manual (Page 462)

12.2 Troubleshooting System Errors
12.2.4 System Register Configuration and Error Status
12-19
Troubleshooting
[ b ] LIO-01/LIO-02 Module Error Status (Slot 1)
[ c ] SVB-01 Module Error Status (Slot 2)
The above error status is meant to check I/O errors when an I/O Module is connected. Errors when SERVOPACKs
and/or MECHATROLINK-II inverters are connected will not be written. Use the monitoring parameter to check errors
when SERVOPACKs and/or MECHATROLINK-II inverters are connected.
Not used SW00226
Error code (I/O error = 2) Subslot No. (= 1) SW00224
Error code (I/O error = 2) Subslot No. (= 2) SW00225
(Bit No.) F ̖̖̖̖̖̖̖̖̖̖̖̖̖̖87 ̖̖̖̖̖̖̖̖̖̖̖̖̖̖0
̖̖̖̖
̖̖̖̖
̖̖̖̖
̖̖̖̖
̖̖̖̖
̖̖̖̖
Not used
Not used SW00227 Not used
Not used SW00228 Not used
Not used SW00229 Not used
Not used SW00230 Not used
Not used SW00231 Not used
ST#15 SW00233
Error code (Station error = 1) Subslot No. (= 1) SW00232
(Bit No.) F ̖̖̖̖̖̖̖̖̖̖̖̖̖̖87 ̖̖̖̖̖̖̖̖̖̖̖̖̖̖0
̖̖̖̖
̖̖̖̖
̖̖̖̖
̖̖̖̖
̖̖̖̖
̖̖̖̖
ST#2 ST#1 Not used
Not used SW00234 ST#30 ST#17 ST#16
Not used SW00235 Not used
Not used SW00236 Not used
Not used SW00237 Not used
Not used SW00238 Not used
̖̖̖̖ Not used SW00239 Not used