Yaskawa MP2000 Series: Built-in SVB or SVB-01 Motion Module - Manual (Page 399)

10.4 Motion Parameter Details
10.4.2 Setting Parameter List
10-35
Settings for Connecting Inverters
OW 76 Transmission Reference Output Data 6
Setting range: 0 to FFFFH
This will be sent as the 7th word of the command Trans-
mission Reference.
OW 77 Transmission Reference Output Data 7
Setting range: 0 to FFFFH
This will be sent as the 8th word of the command Trans-
mission Reference.
OW 78 Transmission Reference Output Data 8
Setting range: 0 to FFFFH
This will be sent as the 1st word of the subcommand
Transmission Reference.
OW 79 Transmission Reference Output Data 9
Setting range: 0 to FFFFH
This will be sent as the 2nd word of the subcommand
Transmission Reference.
OW 7A Transmission Reference Output Data 10
Setting range: 0 to FFFFH
This will be sent as the 3rd word of the subcommand
Transmission Reference.
OW 7B Transmission Reference Output Data 11
Setting range: 0 to FFFFH
This will be sent as the 4th word of the subcommand
Transmission Reference.
OW 7C Transmission Reference Output Data 12
Setting range: 0 to FFFFH
This will be sent as the 5th word of the sub command
Transmission Reference.
OW 7D Transmission Reference Output Data 13
Setting range: 0 to FFFFH
This will be sent as the 6th word of the subcommand
Transmission Reference.
OW 7E Transmission Reference Output Data 14
Setting range: 0 to FFFFH
This will be sent as the 7th word of the subcommand
Transmission Reference.
OW 7F Transmission Reference Output Data 15
Setting range: 0 to FFFFH
This will be sent as the 8th word of the subcommand
Transmission Reference.
Register No. Name Contents