Apple Soundtrack Pro 3 - Manual (Page 537)

Headphones Parameters
These options configure the output signal for the headphone outputs.
• Source pop-up menu: Determines which output pair is sent to the headphone outputs.
Options are Analog Out 1–2, Analog Out 3–4, Analog Out 5–6, Analog Out 7–8, Optical
Out 1–2, Optical Out 3–4, Optical Out 5–6, Optical Out 7–8, and S/PDIF Out.
• Level slider: Sets the level of the headphone outputs.
Main Parameters
You can choose the output channels that you wish to control with the Main Level slider.
• Format pop-up menu: Values are Stereo, 5.1 Surround, and 7.1 Surround.
Analog Line Output Level Settings
You can set the reference level for each of your eight analog line outputs.
• Channel 1-8: Choose either the +4 dBu or –10 dBV option from the respective Channel
pop-up menu to determine the reference level for each of your eight analog line outputs.
Using a Previously Saved Configuration
If you’ve already specified and saved a configuration, you can choose to use that for your
Apogee hardware setup.
To use a saved Apogee configuration
1 Confirm that your Apogee unit is connected and turned on.
2 Choose Soundtrack Pro > Open Apogee Control Panel.
The Apogee Setup dialog appears.
537 Appendix D Working with Apogee Hardware in Soundtrack Pro