Apple Soundtrack Pro 3 - Manual (Page 536)

• Group pop-up menu: The gain controls of the microphone inputs can be assigned to a
group. Groups allow you to link the Gain sliders of the microphone inputs. Changing
the Gain slider of any microphone input assigned to a group also changes the Gain
sliders of all microphone inputs in this group. Individual gain relationships (relative
levels between microphone inputs) at the time the Gain sliders were assigned to the
group are retained. Options are Group 1, Group 2, and None. The Group pop-up menu
is only available to channels used as microphone inputs.
• Soft Limit checkbox: Select to apply Apogee’s soft limiting to the inputs.
• Phase Invert checkbox: Select this checkbox to reverse the phase of the input signal
(available only if the channel is used as microphone input).
• 48V Phantom Power checkbox: Select to activate a 48-volt phantom power supply for
inputs 1 to 4. This checkbox is available only if the channel is used as a microphone
input.
Analog Line Parameters for Inputs 5 to 8
The Analog Line Inputs section offers the following parameters for line inputs 5 to 8:
• Level pop-up menu: Sets the input level of line inputs 5 to 8. Options are +4 dBu and
–10 dBV.
• Soft Limit checkbox: Select to apply Apogee’s soft limiting to the analog line inputs.
Outputs Tab
This tab is used to configure the outputs of your Apogee hardware.
536 Appendix D Working with Apogee Hardware in Soundtrack Pro