Apple Soundtrack Pro 3 - Manual (Page 292)

3 Drag the pan (y) and pan (lfe) sliders to adjust the surround pan settings.
Note: For information on surround panning, see Mixing Surround Sound .
Reordering Sends
You can reorder sends in the Effects tab or in the Mixer.
To reorder a send
µ
In the Effect Parameters area or in the Mixer, drag the send up or down in the list to
change its order.
Bypassing Sends
You can bypass a send. When you bypass a send, the audio is not routed to the bus for
the send and is not heard.
To bypass an effect
µ
In the Effects tab, deselect the checkbox next to the send.
Automating Realtime Effect Parameters
You can automate realtime effect parameters using envelopes. When you automate an
effect parameter, you can change the value of the parameter over time. You are basically
“recording” effect parameter changes into parameter automation envelopes that can
then be edited and re-recorded. For more information about automation, see
Working
with Automation .
To automate a realtime effect parameter
1 In the Effects tab, select the Auto (Automation-enable) checkbox next to the parameter’s
control.
Automation-enable
checkboxes
2 In the Timeline or in the File Editor project view, show the envelopes for the track, bus,
submix, or audio file project.
In the Timeline, you show the envelopes for the track, bus, or submix with the effect. In
the File Editor, you show the envelopes for the audio file project.
292 Chapter 10 Working with Audio Effects