Apple Soundtrack Pro 3 - Manual (Page 326)

µ
Click the Reset button in the Meters tab.
The peak indicators can help identify where clipping occurs in the project. For information
about removing clipping, see
Setting the Overall Project Volume Level .
Removing Channel Strips
You can remove a channel strip from the Mixer if you decide you no longer want it in the
project.
To remove a channel strip
Do one of the following:
µ
Select the channel strip, then choose Multitrack > Remove [item].
µ
Control-click the channel strip, then choose Remove [item] from the shortcut menu.
The term indicated by [item] changes in the menu depending on whether a track, bus,
or submix is selected.
Note: If audio from a track is sent to a bus or output, and you remove the bus or output,
the audio from the track will not be heard when you play the project.
Working with Effects in the Mixer
You can add effects to a channel strip in the Mixer, show effects settings, turn effects on
and off, replace an effect, and delete effects. You can also adjust effects settings in the
Effects tab or in the effect’s advanced settings window.
Adding Effects to a Channel Strip
You can add effects, turn effects off and on, and reorder effects in a channel strip.
Note: Before adding an effect to a track, it’s a good idea to solo the track so that you can
hear how the effect changes its sound, separate from the other tracks in the project.
326 Chapter 12 Basic Mixing in Soundtrack Pro