Apple Soundtrack Pro 3 - Manual (Page 239)

3 In the Analysis Type list that appears, select the checkboxes next to the types of analysis
you want to perform on the audio file.
Analysis tab
Analysis Type list
4 Click the disclosure triangle for the analysis types for which you want to set parameters
(there is a disclosure triangle next to these).
The Clicks and Pops and Silence analysis types have parameters you can set. Each type
has a Threshold slider you can drag to set the threshold for detecting clicks and pops or
detecting silence.
5 In the Parameter list on the right, do one of the following:
• Drag the Threshold slider left to lower the threshold or right to raise the threshold.
• Type a value in the Threshold field.
The Clicks and Pops Threshold slider uses an algorithm to detect transients that are clicks
or pops. Moving the slider to the right results in fewer clicks or pops being detected.
The Silence Threshold slider ranges from 0% to 10% of the full-scale level of the audio
file, which corresponds to a range of -infinity dB to -20 dB.
Parameter list
Analyze button
6 When you’re ready to analyze the file, click the Analyze button, located below the
Parameter list.
239 Chapter 8 Working in the File Editor