Automating effect and send parameters – Apple Soundtrack Pro 3 User Manual
Page 375
To delete envelope points
1
Select the envelope points.
2
Do one of the following:
• Choose Edit > Delete (or press Command–X).
• Press the Delete key.
When you delete envelope points, the envelope adjusts accordingly, moving evenly from
the preceding envelope point to the next envelope point. If there are no other envelope
points, the envelope becomes horizontal, maintaining its initial value for the entire project.
Automating Effect and Send Parameters
You can automate effect parameters for tracks, busses, and submixes and for audio file
projects by adding envelopes for the effect parameters and then adding and adjusting
envelope points. You can also automate send parameters for tracks by adding an envelope
for the send parameters, then adding and adjusting envelope points.
To add an envelope for an effect or send parameter
1
Open the Effects tab and select the effect you want to automate.
2
In the Effect Parameters area, select the Auto checkbox for the parameter.
Click the Auto checkbox
for an effect parameter
to add an envelope for
the parameter.
To remove an envelope for an effect parameter
µ
Deselect the Auto checkbox for the parameter in the Effect Parameters area of the Effects
window.
The range of values for an effect or send parameter envelope is the same as the range
for the parameter in the Effects tab.
For detailed information on adjusting effect parameters, see
375
Chapter 15
Working with Automation