Apple Soundtrack Pro 3 - Manual (Page 337)

Using the Surround Panners
You use the panning controls in the track headers to set the pan position of a track or a
bus. By default, the panning controls are set to stereo. You can easily switch between
stereo panners and surround panners.
Surround panners
Stereo panners
For surround playback, you must set the appropriate tracks or busses to use the surround
panner.
To switch the panning controls from stereo to surround
Do one of the following:
µ
Select a track or bus in the Timeline, then choose Multitrack > Use Surround Panner.
µ
Select a channel strip in the Mixer, then choose Multitrack > Use Surround Panner.
µ
Control-click the stereo pan slider in a track header, then choose Use Surround Panner
from the shortcut menu.
Control-click the stereo
panner, then choose Use
Surround Panner from
the shortcut menu.
µ
Control-click the stereo pan slider in a Mixer channel strip, then choose Use Surround
Panner from the shortcut menu.
337 Chapter 13 Mixing Surround Sound