beautypg.com

Setting the raslog severity filter – Brocade Network OS NETCONF Operations Guide v4.1.1 User Manual

Page 76

background image

44

Network OS NETCONF Operations Guide

53-1003231-02

RASlog configuration

3

informational

Port-profile aa1 removed successfully on TenGigabitEthernet/

2/0/17

other

switchA

(output truncated)

Setting the RASlog severity filter

You can choose one of the following severity levels to filter RASlog messages: INFO (default),
ERROR, WARNING, or CRITICAL. Input values are case-sensitive. The configured severity level
marks the reporting threshold. All messages with the configured severity or higher are displayed.

To set the RASlog severity filter in the VCS Fabric mode, perform the following steps.

1. Issue the RPC to configure the node in the

urn:brocade.com:mgmt:brocade-ras namespace.

2. Under the node, include the node element.

3. Under the node, include the leaf element.

4. Under the node, include the node element.

5. Under the node, include the leaf element and specify INFO, ERROR,

WARNING, or CRITICAL.

23

WARNING

To set the RASlog filter in standalone mode, include the / elements directly
under the node.